BREEZE FC-NFCI Horizontal Concealed Fan Coil Units

Hydronic Terminals

Air volume: 340~2380m3/h

Cooling capacity:2.42~12.92 kW

Climaveneta BREEZE FC-NFCI is horizontal concealed FCU, in accordance with the latest FCU unit GB/T19232-2019 standard; High quality galvanized plate housing; The drainage pan is formed by molding process, no welding seam, welding spot, put an end to the risk of welding water pan corrosion leakage; And the use of heat preservation material in accordance with the fire code is bonded to the water pan; The body structure is delicate and durable.

Xem thông tin liên lạc

Product Description:

•The copper tube and the high-efficiency hydrophilic film cover the fins. The copper tube and the aluminum foil contact more evenly to enhance the heat transfer efficiency. The fan is a large impeller low-noise fan. The head of the water collecting pipe is made of brass to reduce the water pressure drop and further improve the heat transfer efficiency of the coil.

•The impeller of multi wing centrifugal fan is made of galvanized material, and the motor is a low-noise permanent capacitor, which is the best match with the fan. The equipment can operate with low noise and high efficiency.

Product Features:

Casing:
•Beautiful appearance, solid structure;
•The frame is made of high-quality galvanized steel plate, which is not easy to deform. Key components shall be insulated with PE.
•The rear return air and the bottom return air can be freely exchanged;

Coil:
•High quality copper tube and double sinusoidal corrugated hydrophilic aluminum fins are closely combined. The collecting head is forged with brass, with uniform water flow distribution and good heat dissipation effect;
•Thick-walled copper pipe extends the service life of the unit;

Condensation pan:
•The condensation pan is formed by stamping with high-grade steel plate, and the surface is treated by hot-dip galvanizing and baking paint; PE insulation covers the surface of the water pan to prevent water leakage and prolong the service time of the drainage pan. The surface cooler and the water pan shall be fixed with screws to ensure the integrity of the water pan and insulation, and eliminate corrosion and cold bridge. The electric valve and other piping ensure the water collecting effect of the condensation pan.

High efficiency motor:
•Permanent low noise capacitor motor, fully enclosed rolling bearing,and the base is equipped with damping pad to reduce the noise, which is fixed by bolts and runs more smoothly.

Centrifugal fan:
•The material is galvanized sheet, high efficiency and low noise multi wing centrifugal impeller, φ 150mm large wheel diameter improves the dynamic balance of the fan.

Accessories (optional):
● Electric heater;
● Air return plenum (below return or back return)
● Removable filter;
● Extended condensation pan;
● Stainless steel condensation pan;
● Ultraviolet sterilization lamp;

Phiên bản
Cấu hình
Phụ kiện
Điều khiển
Tải xuống
Tài liệu Sản phẩm Ngày tạo Loại tài liệu Tải xuống
Tải PDF
Tải PDF
Tải PDF

Bạn có quan tâm đến sản phẩm này?

Liên hệ với chúng tôi